Six weeks into the quarter that runs from 1 October to 31 December, the EU's new steel tariff-rate quota (TRQ) regime has already run out of room in a dozen product lines and is above 90% utilisation in more than twenty others, according to European Commission quota data reported by SteelOrbis on 18 November. That is not, on its face, surprising: any first-come, first-served system will fill fast in a market where the alternative to duty-free access is a 50% ad valorem duty. What matters is which lines have run out, and why the pattern is so uneven.

The doors that are already shut

The exhausted and exceeded lines divide into three distinct groups, each with a different commercial logic.

Country-specific quotas (CSQs) gone. China has exhausted its hollow sections allocation (3,680 t) and overrun its merchant bars and light sections (39,545 t) and rebar (9,745 t) quotas. India has exhausted its 6,158 t other welded pipes quota. Turkey's 24,235 t wire quota and Switzerland's 40,578 t wire rod quota are both fully consumed.

FTA-CSQ pool gone. The additional first-come, first-served pool reserved for FTA partners whose own CSQ is used up has itself been drained in organic coated sheets (12,575 t), HRC 1A (120,920 t), hollow sections (8,487 t), other welded pipes (4,057 t) and gas pipes (3,910 t).

Residual and FTA-Other pools gone. The "other countries" residual has run out for metallic coated 4B (23,174 t), organic coated (7,078 t) and wire (7,072 t); the FTA-Other pool has gone for HRC 1A (4,271 t) and metallic coated 4A (12,761 t).

A notable feature: the tonnages now waiting at EU ports for clearance are trivial — 2 t, 4 t, 16 t, 25 t, 37 t. These are not queues of distressed cargo. They are the tail end of quota lines that were consumed weeks ago, with a handful of consignments caught in the transition.

The near-misses are the real story

The exhausted lines are visible and, in trade terms, almost a distraction. More telling is the cluster of allocations sitting above 90% in mid-November with six weeks still to run. Consider the spread across flat and long products:

ProductOrigin / poolQuota (t)Usage (%)
HRC (1A)Indonesia31,83499.96
HRC (1A)India152,30999.01
HRC (1A)Vietnam103,76696.4
Quarto platesIndonesia53,15399.99
Quarto platesSouth Korea79,91799.04
Organic coatedIndia54,65999.5
Metallic coated (4A)South Africa3,15099.97
CRCFTA-Others21,35899.91
Cold finished barsChina3,96099.87
Hollow sectionsUkraine6,64099.73

Source: European Commission quota data as reported by SteelOrbis, 18 November 2026. Quota volumes are allocations, not imports; usage percentages are as reported.

Three Asian origins — India, Vietnam, Indonesia — hold the bulk of the near-exhausted hot-rolled coil room. Together those three lines account for roughly 288,000 t of HRC quota practically spoken for. Indonesian quarto plate is at 99.99%; South Korean plate at 99.04%. India's organic coated quota is 99.5% used.

What the pattern says about the 50% duty

The Commission's measure, in force since 25 June 2026 and applying from 1 July, caps duty-free steel at 18.3 Mt a year across 26 product categories, with out-of-quota imports facing a 50% duty — a step change from the safeguard-era 25%. Half the total is reserved for FTA partners.

That design produces a specific market outcome. Where the duty-free quota is large relative to a given origin's normal export flow, the 50% duty acts as a genuine ceiling and trade re-routes or stops. Where a country's CSQ is small relative to its actual capacity to ship — China in long products is the obvious case — the quota is consumed within days and the residual pool becomes the marginal supplier. And where an FTA partner's CSQ is exhausted, its exporters can fall back on the FTA-CSQ pool and, where eligible, the FTA-Other pool. That layered access is why the FTA pools themselves have drained so early: they are absorbing overflows from exhausted CSQs as well as demand from partners without one.

There is an important counter-current. ArcelorMittal's third-quarter analyst material estimated Q3 2026 EU flat-steel imports at roughly 2.5 Mt against a 3.0 Mt quota — about half the Q3 2025 level — and EUROFER reported EU steel imports down 5% in the first half. The rapid quota exhaustion in Q4 is therefore not evidence of a broad import surge. It is better read as evidence of concentration: a smaller volume of imports now competing for a smaller, more fragmented set of duty-free lanes, with origins that hold those lanes filling them quickly.

Who is actually paying the 50%

The practical consequence is a widening gap between delivered costs at EU ports, depending on whether a given cargo wins the quota race. A tonne of Indonesian HRC that clears within quota and a tonne that does not can differ by tens of euros per tonne on duty alone before any freight or margin effects — a spread wide enough to redirect order books and to make quota position itself a tradable asset.

The lines that have run out for the residual pools — metallic coated 4B, organic coated, wire — are the ones most exposed. Exporters to those pools had no CSQ of their own to fall back on, and once both the residual and FTA pools are gone, their only route in is at the 50% rate. That, rather than the headline Chinese long-product numbers, is where the measure is most likely to be biting hardest on smaller origins.

What to watch before 31 December

Three things matter for the rest of the quarter and the handover to Q1 2027:

  1. Carry-over. Under the 1 July 2026–30 June 2027 regime, unused quota carries over within the first year. That means pre-Christmas restocking decisions on slow-moving lines may wait for January capacity rather than pay the duty now.
  2. The Commission's review. The Commission has launched a targeted consultation on how the steel regulation is working after its first quarter. Early exhaustion across so many lines, in so many products, is precisely the kind of evidence that review will weigh — and it cuts both ways: European producers will point to it as proof the measure is needed, while importers and downstream users in coated sheet, tube and wire will point to allocation design as the binding constraint rather than import pressure.
  3. The Q1 resets. With HRC lines for India, Vietnam and Indonesia effectively exhausted, and plate for Indonesia and South Korea nearly so, the Q1 2027 reallocation will be the first real test of whether the regime's origin-weighted architecture is producing the intended result — or simply redistributing the same import volume among a different set of winners.

For buyers of coated flat products, welded tube and wire, the immediate message is unglamorous but concrete: assume out-of-quota pricing on any new non-CSQ cargo landed before year-end, and check quota order numbers against the Commission's live QUOTA database before committing. For sellers, the calendar has become part of the commercial terms.

Source & methodology +

MetalMate separates original-source evidence from summary and analysis. Verify the original source before procurement, legal or engineering decisions.

Article status
Published · Version 1
Source date
18 November 2026
MetalMate publication
18 November 2026
Verification
Automated evidence checks; not human reviewed

EU steel import quotas under FTA-CSQ and FTA-Others exhausted for several products — SteelOrbis